Agyahere (Protomegabaria stapfiana)
Family: Euphorbiaceae
Common names: Agyahere, Agyehyele, Asa boguie, Bogboi, Do, Emuinguim, Gbangfoboi, Gbogboi, Mbraoue, Senan, Subite, Wan
Distributed in: Benin, Cameroon, Equatorial Guinea, Gabon, Ghana, Ivory Coast, Liberia, Nigeria, Sierra Leone, Togo (Africa)
Common uses: Fuelwood, Light construction
Environment profile: Abundant/Secure
Tree size: Trunk diameter is 100-150 cm
Colors: the heart isYellow, Yellow to golden-yellow to orangeand the sapwoodWhite, Yellow.The grain isStraight, the textureMediumand the lusterSlightly lustrous
Natural durability: Susceptible to insect attack, Very durable
Odor: Has an odor
Kiln Drying Rate: Very slow
Drying Defects: Checking, Splitting
Ease of Drying: Slowly
Tree Identification: Bole/stem form is not buttressed
Comments: General finishing qualities are rated as good
Blunting Effect: Moderate
Boring: Fairly easy to very easy
Carving: Fairly Easy to Very Easy
Cutting Resistance: Moderate to saw
Gluing: Fairly Easy to Very Easy
Mortising: Very Good to Excellent
Moulding: Very Good to Excellent
Movement in Service: Very Good to Excellent
Nailing: Pre-Boring Recommended, Very Good to Excellent
Planing: Very Good to Excellent
Resistance to Impregnation: Resistant sapwood
Response to hand tools: Responds Readily
Routing recessing: Very Good to Excellent Results
Sanding: Fairly Easy to Very Easy
Veneering qualities: Veneers easily, Veneers moderately easy
Steam bending: Tends to Degrade
Screwing: Pre-boring recommended, Very Good to Excellent Results; Turning: Very Good to Excellent Results
Painting: Very Good to Excellent; Polishing: Very Good to Excellent; Staining: Very Good to Excellent;
- Numerical data Metric
- Numerical data English
- Strength properties
- References
 |
 |
 |
 |
Item |
Green |
Dry |
Metric |
Specific Gravity |
|
|
|
Density |
|
689 |
kg/m3 |
Bending Strength |
|
|
kg/cm2 |
Crushing Strength |
275 |
449 |
kg/cm2 |
Hardness |
|
752 |
kg |
Impact Strength |
|
|
cm |
Shearing Strength |
|
|
kg/cm2 |
Stiffness |
|
|
1000 kg/cm2 |
Tangential Shrinkage |
|
|
% |
Radial Shrinkage |
|
|
% |
Weight |
|
|
kg/m3 |
Maximum Load |
|
|
cm-kg/cm3 |
Toughness |
|
|
cm-kg |
Static Bending |
|
|
kg/cm2 |
|
 |  |  |  | Item | Green | Dry | English | Density | | 43 | lbs/ft3 | Hardness | | 1658 | lbs | Maximum Crushing Strength | 3916 | 6397 | psi | Weight | 42 | 34 | lbs/ft3 | |
Density (dry weight) = 46-52 lbs/cu. ft. Density (dry weight) = 38-45 lbs/cu. ft. Max. crushing strength = medium Hardness (side grain) = medium
Cooper, G.P., Record, S.J.,1931,The Evergreen Forests of Liberia,Yale School Forestry Bulletin,31,pp1-153Erfurth, T., Rusche, H.,1976,The Marketing of Tropical Wood A. Wood Species from African Moist Forests,F.A.O. Forestry DepartmentIrvine, F.R.,1961,Woody Plants of Ghana,O.U.P. LondonKeay, R.W.J., et al,1960,Nigerian Trees Vol.1,Nigeria Federal Department of Forest Research, IbadanKryn, J.M., Forbes, E.W.,1959,The Woods of Liberia,U.S.A. Department of Agriculture,Forest Products Laboratory, Madison,,Report No. 2159Kunkel, G.,1965,The Trees of Liberia,German Forestry Mission to Liberia Report,No.3Savill, P.S., Fox, J.E.D.,1967,Trees of Sierra LeoneTakahashi, A.,1978,Compilation of Data on the Mechanical Properties of Foreign Woods (Part,III) Africa,Shimane University, Japan, Research Report on Foreign Wood No. 7
|