Wood inspector

Sei in: home » database dei legni
  • Decrease font size
  • Default character size
  • Encrease font size


Fornitori

Ditta 5
Indirizzo: via dei platani 4 liguria
Tel.: +39 456 5664 54

Sito web: www.pippo.it
E-mail: 
Ditta 4
Indirizzo: via dei platani 4 liguria
Tel.: +39 456 5664 54

Sito web: www.pippo.it
E-mail: 
Ditta 3
Indirizzo: via dei platani 4 liguria
Tel.: +39 456 5664 54

Sito web: www.pippo.it
E-mail: 
Ditta 2
Indirizzo: via dei platani 4 liguria
Tel.: +39 456 5664 54

Sito web: www.pippo.it
E-mail: 
Ditta 1
Indirizzo: via dei platani 4 liguria
Tel.: +39 456 5664 54

Sito web: www.pippo.it
E-mail: 
Ditta 0
Indirizzo: via dei platani 4 liguria
Tel.: +39 456 5664 54

Sito web: www.pippo.it
E-mail: 

Contatti

database dei legni


Ask informationsPrint pageSend to a friend
Malasantol
Malasantol (Sandoricum vidalii)

Family: Meliaceae

Common names: Bagosantol, Biot, Magsantol, Malabobonau, Malarambo, Malasantol

Distributed in: Philippines (Oceania and S.E. Asia)

Distribution overview: The species occurs in the Philippines.

Common uses: Cabinetmaking, Carvings, Ceiling, Framing, Furniture , Hatracks, Posts, Sculpture

Product sources: The timber is rarely separated and marketed. When available it is usually found in a mixture with other species.

Environment profile: Vulnerable within its natural growth range

Colors: the heart isRed, Yellowand the sapwoodThickness varies , Yellow.The grain isStraight to slightly interlocked , the textureSmooth

Natural durability: Perishable, Very little natural resistance to decay in ground contact

Odor: No characteristic taste

Drying Defects: Discoloration The wood has a slight tendency to distort and check during seasoning

Ease of Drying: Shrinkage is moderate

Comments: This species is very similar in appearance and properties to Santol (Sandoricum koetjape), and is used for the same applications

Blunting Effect: Moderate dulling effect on cutting edges

Boring: Fairly easy to very easy

Carving: Very Good to Excellent Results

Cutting Resistance: Easy to saw

Gluing: Satisfactory gluing properties

Mortising: Fairly Easy to Very Easy

Moulding: Fairly Easy to Very Easy

Movement in Service: Fairly Easy to Very Easy

Nailing: Does not require to be pre-bored , Nails without splitting

Planing: Fairly Easy to Very Easy

Response to hand tools: Responds Readily

Routing recessing: Fairly Easy to Very Easy

Turning: Very Good to Excellent Results

Staining: Satisfactory properties ;

  • Numerical data Metric
  • Numerical data English
  • Strength properties
  • References
Item Green Dry Metric
Specific Gravity
Density kg/m3
Bending Strength 598 749 kg/cm2
Crushing Strength 321 453 kg/cm2
Hardness kg
Impact Strength cm
Shearing Strength kg/cm2
Stiffness 104 120 1000 kg/cm2
Tangential Shrinkage %
Radial Shrinkage %
Weight kg/m3
Maximum Load cm-kg/cm3
Toughness cm-kg
Static Bending 446 525 kg/cm2
Item Green Dry English
Bending Strength 8516 10662 psi
Maximum Crushing Strength 4567 6448 psi
Static Bending 6350 7477 psi
Stiffness 1488 1719 1000 psi
Specific Gravity 0.62 0.65

Compression strength (parallel to grain) = high
Comparable to teak
Bending strength (MOR) = high
Air-Dried condition about 12% moisture content
Other species in this strength range include Teak, White oak, and Hard maple

Schneider, E.E. 1916. Commercial Woods of the Philippines: Their Preparation and Uses. Bulletin No. 14. Department of the Interior, Bureau of Forestry, Manila, Philippines.WCMC. 1992. Conservation Status Listing: Trees and Timbers of the World. World Conservation Monitoring Center (WCMC, Plants Program, 219 Huntingdon Road, Cambridge, CB3 ODL, United Kingdom.
*Come interpretare i dati (manleva su eventuali imprecisioni)